SensorHawk Door & Security Sensors

Environmental monitoring with SensorHawk Door & Security Sensors from Enviromon. Our base units and smart sensors provide 24/7 monitoring and data logging for environmental conditions using door and security smart sensors and alarms can alert you by email or SMS when user-defined conditions are met.

See our complete list of smart sensors in our online store.

Door & Security Smart Sensor

SKU: SH-SS-15
Weight: 1.00 lbs
Price: $ 135.00 USD
($ 179.55 CAD)
  Datasheet

The Door & Security Smart Sensor is a magnetic on / off switch, which closes when one half of the sensor is in close proximity to its mate. It is designed to be mounted on doors or windows. When the two sensor pairs are moved apart from each other they open. The base unit senses this closure and opening, and reports the condition.

It works with all SensorHawk Base Units and SecurityHawk Base Units and must be connected to a base unit in order to function properly.

SNMP traps and sensor polling available (MIB file supplied).

SMART SENSOR FEATURES

  • View from any web browser
  • Quick and simple set-up and configuration
  • Receive email and SMS alert notifications
  • Supports SNMP polling
  • Easy firmware updates

SPECIFICATIONS

  • Length: 4.5 meters (15 feet)
  • Maximum Extension Cable Length: 305m (1000 feet) with standard CAT 5 cable
  • Sampling Rate: Multiple Readings per Second
  • Measurement Range: Alarm or Normal
  • Communications Cable: RJ45 jack to sensor using UTP Cat 5 wire
  • Sensor Type: Open / Closed Contact Switch
  • Disconnect Alarm: Relay alert if sensor becomes interrupted or disconnected.

Siren & Strobe Light

SKU: SH-STR-00
Weight: 1.00 lbs
Price: $ 195.00 USD
($ 259.35 CAD)
  Datasheet

The combined Siren & Strobe Light can add audio and visual alarms to your base unit. When triggered, the siren will generate a loud alarm sound and the strobe light will flash brightly, giving a clear alert of an alarm condition. The siren and alarm are both incorporated into one device - only one RJ-45 jack is needed for each combined siren/alarm. The siren / strobe light can be triggered manually, via the web interface, or it can be configured to turn on at certain times, through the web interface.

It works with all SensorHawk Base Units and SecurityHawk Base Units and must be connected to a base unit in order to function properly.

ACCESSORY FEATURES

  • View from any web browser
  • Quick and simple set-up and configuration
  • Receive email and SMS alert notifications
  • Supports SNMP polling
  • Easy firmware updates

SPECIFICATIONS

  • Length: 1.5 meters (5 feet)
  • Maximum Extension Cable Length: 305m (1000 feet) with standard CAT 5 cable
  • Sampling Rate: Multiple readings every second
  • Measurement range: Alarm or Normal
  • Measurement Range: Detects voltage at 50V AC to 250 VAC
  • Communications Cable: RJ45 jack to sensor using UTP Cat 5 wire
  • Sensor Type: Open / closed contact switch
  • Full autosense including disconnect alarm