Temperature getting too high? Turn on a fan - automatically.
Motion detected? Turn on a light - automatically.

The Sensor Controlled Relay controls the electrical power to devices managed over the Internet. With easy configuration and integration with our SensorHawk (SensorHawk2, SensorHawk8 and SensorHawk8/20) and SecurityHawk Base Units, the Sensor Controlled Relay defines a new era in environmental management.

The Sensor Controlled Relay is easily controlled by any of our extensive selection of smart sensors. The relay can provide automatic responses to sensor alerts. Setting up the Sensor Controlled Relay is easy with its built in autosense feature and user friendly web interface. The device can also be monitored and controlled by external management systems via SNMP.

The Sensor Controlled Relay provides 1 high-power SPDT 5V relay with the maximum load up to 15A at 220 VAC. It includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relays from the high voltage spikes or noise transients. It monitors the power & load and accepts a control signal which is sent from a base unit.

When a sensor goes to the chosen state, for example, High Critical, the Relay can be made to cycle, which will turn on and then turn off the external device for the selected period of time. Users can easily change the fields in the Relay Settings Menu according to their needs using the friendly web interface.

The unit has built in 16Amp circuit breaker and 15Amp fuse (380 VAC, 125 VDC) to give extra protection for the connected external devices from possible damages by electrical fault. Four onboard LEDs provide visual status indicators.