AC Voltage Sensor

USD $150.00

- +

AC Voltage Sensor

The AC voltage sensor is used to indicate the presence or absence of line voltage

The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor.

  • Powered by the base unit

Additional information

Option

AC Voltage Sensor

The AC Voltage Sensor is used to indicate the presence or absence of line voltage. This is useful, for example to tell when the UPS is running on battery power.

The AC Voltage Sensor indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. Voltage detectors can detect the presence or the absence of line voltage. It is designed for use worldwide. There is an SNMP interface for getting the alarm/normal status. SNMP traps are sent when critical conditions occur.

SNMP polling via ‘get’ is available to retrieve existing status and configuration parameters. The Web browser interface is also available to display the status and configuration parameters.

When an alarm condition is activated the description and location of the fault can be sent via email, page or traps.

Specifications

Specifications

Measurement Type Normal or Alarm
Sensor Type Open/Closed contact input switch
Voltage Range 50~250 VAC
Measurement Rate Multiple readings every second
Indication LED for Voltage presence
Operating Temperature -20 °C~60 °C
4 °F~140 °F
   
Interface  
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length The AC Voltage Sensor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 1000 feet, or 300 meters using standard CAT5/6 LAN cable
Power Source Powered by the controller unit. No additional power needed
  Full autosense including disconnect alarm
Power Consumption Typical 11 mWatt, 2.20mA
Dimensions 115 x 80 x 40 mm
Sensor count 1

Video Presentation

3D View


View Separately