Single Port Temperature Humidity Sensor Water Resistant

USD $195.00USD $325.00

- +
SKU: THSW15 Category:

Temperature and Humidity Sensor (Water Resistant)

Water resistant temperature and humidity sensor

This water resistant version of the AKCP Single Port Temperature and Humidity Sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

  • Powered by the base unit

Additional information


, , ,

Single Port Temperature and Humidity Sensor (Water Resistant)

In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.

All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.



Measurement Range Celsius -40°C to +75°
Measurement Resolution Celsius 1°C
Measurement Accuracy Celsius Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit -40°F to +167°F
Measurement Resolution Fahrenheit 1°F increments
Measurement Accuracy Fahrenheit Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF


Measurement range 0 to 100% Relative humidity
Resolution 1%
Accuracy at 25°C ±3%
Communications cable UTP Cat 5 cable
Power source Powered by the sensorProbe. No additional power needed
Power Consumption Typical 7.25 mWatt, 1.45mA
  Sensor element wettable without damage
  sensorProbe auto detects the presence of the dual sensor
  Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe


  • Monitors temperature and humidity on a single intelligent sensor port
  • Designed for use in wet/damp/outdoor environments
  • Own SNMP OID for data collection via a network
  • Temperature measurement from -40ºC – +75ºC
  • Relative Humidity measurement from 0% – 100%
  • Powered by base unit, no additional power needed


Our Single Port Temperature/Humidity Sensor is calibrated using dedicated equipment which is calibrated according to ISO/IEC 17025 and calibrated by comparison against natural standards, natural physical constants, consensus standards, or by ratio type measurements using self-calibrating techniques.

Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.