Smoke Detection Sensor

USD $225.00

- +
SKU: SK00 Categories: ,

Smoke Detector

Accurate, cost effective Smoke Detector

This product can be connected to both the sensorProbe or securityProbe base units.

Monitoring for developing smoke is an essential aspect in the security and safety of any facility.

AKCP has designed a smoke sensor specifically for use with its sensorProbe, SensorProbe X+ and securityProbe productline. These smoke detectors are easy to install and configure and can be used in conjunction with all other of AKCP’s alerting features.

 

Additional information

Option

Smoke Detector

Monitoring for developing smoke is an essential aspect in the security and safety of any facility.

AKCP has designed a smoke sensor specifically for use with its sensorProbe and securityProbe productline. These smoke detectors are easy to install and configure and can be used in conjunction with all other of AKCP’s alerting features.

Specifications

Specifications

Measurement Range Smoke or No Smoke
Sensor Type Photoelectric Detector Type
  Suitable for installation to BS 5839 pt 6 Grade F
Output Type Open/Closed contact switch
Features Loud piercing 85db alarm at 3m
  Full function test button
  Alarm auto-reset
  Insect resistant chamber
  Low profile design for ceiling mounting for maximum smoke detection
Measurement Rate Multiple readings every second
Indication LED for Status
Strobe Light when Smoke is detected
Operating Temperature -20 °C~60 °C
4 °F~140 °F
   
Interface  
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length The Spot Water Sensor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 500 feet, or 150 meters using standard CAT5/6 LAN cable
Power Source Interface module powered by the base unit.
Internal battery inside smoke detector.
  Full autosense including disconnect alarm
Power Consumption Typical 290 mWatt, 58mA
Dimensions Diameter 100mm, height 28mm
Mounting Screw mounting
Sensor count 1

Features

  • Accurate, cost effective Smoke Detector
  • On/Off alarm signal of Smoke Detected
  • LED indicates the status of Smoke Detector
  • Low profile design for ceiling mounting for maximum smoke detection
  • Sensor type – open/closed contact switch
  • Up to 2 Smoke Detector Sensors per sensorProbe2, and 8 per sensorProbe8/securityProbe
  • Includes disconnect alarm that checks that the sensor is securely plugged into the sensor/securityProbe
  • The smoke detector can also be attached to dry contacts of a X20 or X60 unit
  • With 9V battery as backup the sensor/securityProbe will still work as a smoke detector on its own

3D View


View Separately

Often purchased with